BETAFPV LED Board (2PCS)[BF-00313443]

【仕様】
LED: WS2812B-5050
Size: 23.5mm × 11.4mm
Voltage: 3.3〜5.2V DC
Support: Betaflight / Cleanflight
Frame: Beta 75X
Weight: 1.0g
Wire Material: Silicone wire coated with tin
Wire Length: 65mm
Wire Color: Red, Yellow, Black


【LEDボードとFCの接続方法】

◎V1.1 Version
Go to the CLI tab in Betaflight GUI and copy all the commands below to enable the LED_STRIP, but the TX1 port will be invalid.

resource SERIAL_TX 1 NONE
resource LED_STRIP 1 NONE
resource LED_STRIP 1 A09
save

If the LED still doesn’t work when you set LED_STRIP, please put your FC in DFU mode and reflash. Note that the 5v pad on the led strip can be soldered on the +5v or the Buzz+ of the FC (see diagram).


◎V1.2 Version
Note that the 5v pad on the led strip can be soldered on the +5v or the Buzz+ of the FC (see diagram).


【 LEDのセットアップ方法(BETAFLIGHT)】
1.Enable LED Strip in Configuration Tab and click the Save and Reboot button in the lower right corner.


2.Click Wire Ordering Mode


3.You can start to choose the color of the LED now.

Note: You should start to choose the color from the top left corner first otherwise you will fail to set up the color. Don't forget to save all of your setting after you make all of the changes.


【セット内容】
2x LED BOARD
2x Red Wires
2x Yellow Wires
2x Black Wires



この商品を買った人はこんな商品も買っています