★送料無料★ Beta75X HD Whoop Quadcopter (3S) ( S-FHSS+D16 RX)[BF-]





・送料無料にて発送致しますが、同梱につきましては小さな商品は可能ですが大きな商品や大量の場合は別途送料が発生致します。
・同梱可能な場合は、(自動メールではない)弊店受注の際に訂正させて頂きます。

=小さな同梱商品がありクレジット決済をご利用されるお客様へ=
デビットカードやお客様のご都合で弊店にて金額の変更が出来ないカードの場合、小さな商品の同梱でもマイナス訂正が出来ませんので、そのほかのカードまたは銀行振込、代金引換をご選択ください。




Beta75X 3S Whoop HDバージョンは、Turtle V2カメラを搭載し、3Sバッテリーをサポートしています。 パワフルな飛行と、高品質のビデオを楽しむことを可能にします。 Bete75X 3S HD whoopは軽く、周囲により安全で、静かで、制御しやすい機体です。
高性能STM32F411CEU6チップ、FCボードと微調整されたBetaflight MATEKF411(MK41)ファームウェアで、誰もがレーシングプロのようにBeta75Xドローンを飛ばすことができます。
丈夫で軽量のフレームはBeta75X用にカスタマイズされており、 総重量は57.4g。
全ドローンはんだ付けやカスタマイズは必要ありません。
デフォルトでは300mAh 3Sのハイレートバッテリーが推奨されます。


Right now here we can see a big progress on Beta75X 3S Whoop HD version which is installed with a Turtle V2 camera and support 3S battery! It enables you to experience powerful flight and enjoy the high quality video at the same time. For those people who wanna record a video by chasing in a park or at home, Bete75X 3S HD whoop is definitely a best choice. A lighter build safer around people, quieter, and easier to control.
Beta75X starts a new era of 3S whoop drones. With a big improvement in power, you could fly real acro, like a larger quad, but is still small enough, safe enough, and quiet enough to fly anywhere.
With the high performance STM32F411CEU6 processor FC boards and tuned Betaflight MATEKF411 (MK41) firmware, everyone could fly the Beta75X drone like a racing pro.
Experience high quality video and high-definition DVRs with the Caddx Turtle V2 on Beta75X HD version.
Durable and light enough frame is customized for the Beta75X. A total weight of 57.4g give pilots a good balance of weight and nice punch on 3S battery.
Whole drone no soldering or tinkering necessary. Customized 1103 8000KV motors with cable connectors, provide powerful thrust on 3S, just plug and play.
300mAh 3S high rate battery is recommended by default.





【仕様】
Weight:57.4g (without battery)
Motors: 1103 8000KV motor with connector
Props: 40mm 4-blades props, 1.5mm shaft hole
Camera: CADDX Turtle V2 ( for HD DVR version)
Canopy: Canopy for Beta75X (HD DVR)
Receiver Option: Futaba S-FHSS
Frame: Beta75X Frame
Recommend battery: 300mAh 3S 45C Battery (別売り)



FC
CPU: STM32F411CEU6 (100MHZ )
Six-Axis: MPU6000 (SPI connection)
Size: 26mm x 26mm, whoop mounting pattern
Firmware version: Betaflight MATEKF411 (MK41)
OSD: Built-in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode)
Receiver: Support Frsky XM/XM+ Receiver/ Futaba Receiver/ Flysky Receiver/ TBS Crossfire Receiver. Add Frsky R9M Receiver and DSMX receiver since V1.2.
Support programmable LED like WS2812 etc
Built-in current sensor Weight: 5.6g

ESC
Support BLheli/BLHELI_S suite Pass-through ready
Support PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600
Input voltage: 2S-4S Lipo
Continue current: 12A
Peak current: 13A
Firmware: BLHELI_S
Processor: SILABS EFM8BB21F16G
Motor Connectors: 1.25mm header pins connector
Factory firmware: G-H-30-16.7
CADDX TURTLE V2 CAMERA AND A01 VTX
Find more details about Caddx Turtle V2 camera in another page.

To enjoy the powerful flight and capture HD beautiful flying video at the same time, many pilots revamped their Beta75X with HD camera. Inspired by this, we upgraded the Beta75X to 3S with Caddx Turtle V2 camera so that pilot do not need to assemble it any more and get more power on punch for acro mode. The angle for the camera is 30° and unadjustable.

Besides that, the newest A01 VTX board is lighter and perfectly suitable for canopy with switchable output power between 25mW and 200mW. Smart audio is available for VTX remote control in default.

Output power: 25mW and 200mW (Adjustable)
Smart Audio function is included for radio control
Frequency: 5.8GHz 6 bands 48 channels, with Raceband: 5362~5945MHz
Caddx Turtle V2 camera
TV System: NTSC
Aspect Ratio: 4:3(non-changeable)
Image sensor: 1 / 2.7" CMOS sensor



PROP OUT & WASH OUT
The Beta75X drone comes with "props out" in default. Why we need "props out" direction?



Default Betaflight props direction, quadcopter dips and "washes out" in hard corners. With reversed props or "props out", no more dipping even in hardest cornering.



【セット内容】
1x Beta75X BNF 3S Whoop Quadcopter(SFHSS)
1x Spare 40mm 4-blades props (2CW+2CCW)
1x 簡易日本語説明書

★機体に付いている受信機(AC900)★について
こちらの受信機は、FUTABA S-FHSSとFRSKY D16を切り替えることによって両方のシステムをご使用頂けます。

【FUTABA S-FHSSとFRSKYの切り替え方法はこちら】※発送時は FUTABA S-FHSS

※こちらの商品は、お客様に郵送する前にヘリモンスターにてホバリングまでの動作確認テストを行います。
U199(200g未満)



【メンテナンスパーツリスト】
プロペラ
1635-3 (40mm) 1.5mm 3-Blade Propeller (GemFan/4ペア/Clear Blue)
1635-3 (40mm) 1.5mm 3-Blade Propeller (GemFan/4ペア/Clear Red)
1636-4 (40mm) 1.5mm Mounting Hole 4-Blade Propeller (GemFan/4 Pairs/Clear Red)
1636-4 (40mm) 1.5mm Mounting Hole 4-Blade Propeller (GemFan/4 Pairs/Clear Blue)
40mm 4-blade 2S Whoop Propellers BLUE (1.5mm Shaft Hole)

モーター
BETAFPV 1103 8000KV Brushless Motors [BF-00313529]
BETAFPV 1103 8000KV Brushless Motors バラ売り [BF-00313529-1個]

キャノピー
BETAFPV Canopy for EOS2 Camera BLACK
BETAFPV Canopy for EOS2 Camera BULE
MONSTER ver 3D Print Canopy (Beta85X,85X HD,75X HD ) ※色選択あり [VTF]

フライトコントローラー
BETAFPV F4 2-4S AIO Brushless Flight Controller 12A (BLHeli_S) [BF-00313527]

VTX
A01 25-200mW 5.8G VTX

フレーム
Beta75X 2S Whoop Frame Black [BF-00313547]

カメラ
Caddx Turtle V2 1080p 60fps Mini HD FPV Camera w/ DVR (FOV 155° / Red)
Caddx Turtle V2 1080p 60fps Mini HD FPV Camera w/ DVR (FOV 155° / Black) [09-573]

バッテリー
BETAFPV 300mAh 3S 45C Lipo Battery (2PCS)[BF-00313560]

LED
BETAFPV LED Board (2PCS)[BF-00313443]






KW:Tinywhoop KW:Cinewhoop

この商品を買った人はこんな商品も買っています