★送料無料★ Beta85X 4K Whoop Quadcopter (4S)( S-FHSS+D16 RX) [BF-313564_4]

★送料無料★



・送料無料にて発送させて頂きます。同梱につきましては小さな商品は可能ですが大きな商品や大量の場合は別途送料が発生致します。
・同梱可能な場合は、(自動メールではない)弊店受注の際に訂正させて頂きます。

=小さな同梱商品がありクレジット決済をご利用されるお客様へ=
デビットカードやお客様のご都合で弊店にて金額の変更が出来ないカードの場合、小さな商品の同梱でもマイナス訂正が出来ませんので、そのほかのカードまたは銀行振込、代金引換をご選択ください。




Since YKS has shared his cinewhoop 4K with a stunning videography, people are fascinated in 4K whoop. So here we are. A real 4S 4K Beta85X whoop!!! Upgraded F4 V2 FC with BLHeli_32 16A ESC, using single N-channel MosFETs, makes the structure and performance more stable and support 4S power definetly. Mounting with Tarsier 4K camera, great choice for cruising, so you can get tons of fun in this cine whoop.


BULLET POINT
F4 V2 FC board has added extra 4 pluggable ports for ESC, VTX, RX and LED board, convenient installation and decreasing the dislocated PIN mounting.
High performance STM32F405 processor FC boards and tuned Betaflight OMNIBUSF4SD (OBSD). Faster input signals with lower latency and higher update rate are reachable.
Using single N-channel MosFETs on ESC board which have a lower inner resistance. It is dual MosFETs on the original BLHeli_32 ESC board.
Soldering with 25V/220uf electrolytic capacitor, for protecting ESC board, reducing the defective rate caused by the instantaneous high voltage.
Installed with Caddx Tarsier 4K camera with ND8 fliter which supports APP setting and switchable resolution setting of 4K, 2.7k, 1440P, 1080P.
Upgraded 1105 motor from 6000KV to 5000KV, with a light weight but definitely will give you extreme power and speed. Motor comes with cable connectors.
Durable and light enough frame is customized for the Beta85X. To increase its stability, we specially add an extra stiffener brace of carbon fiber. Whole drone no soldering or tinkering necessary.
450mAh 4S high rate battery is recommended by default. But pilot could also use their own batteries with battery strap. Optional and affordable.
For 85mm brushless whoop drones, there are 3 versions for your choice - Beta85X FPV, Beta85X HD and Beta85X 4K.


【BETA85X 仕様】
Weight: 88.6g (without battery)
F4 V2 4S Flight Controller
16A BLHeli_32 ESC
Motors: 1105 5000KV with connector
Props: 2" 4-Blades Props
Camera: CADDX Tarsier 4K
Canopy: Canopy for Beta85X 4K Version
Receiver option: Frsky XM+ / DSMX / Futaba S-FHSS / Flysky / TBS Crossfire / PNP
Recommend battery: 4S 450mAh Battery (Not including)
5.8G FPV antenna
Flight time: 4min - 6min with 450mAh 4S battery

FC 仕様
Find more details about this F4 V2 4S FC in another page.
CPU: STM32F405 (Overclock to 240MHz)
Six-Axis: MPU6000
Size: 26mm x 26mm, whoop mounting pattern
Firmware version: Betaflight OMNIBUSF4SD (OBSD)
OSD: Built-in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode)


ESC 仕様
Find more details about this BLHeli 32 ESC board in another page.
Support BLHELI_32
Support PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600, Dshot1200
Input voltage: 3-4S lipo
Cotinue current: 16A
Peak current: 19A
Firmware target: BETAFPV-16A-32bit
MCU: STM32F051K66

カメラ仕様
Find more details about this Caddx Tarsier 4K camera in another page.
Weight: 19.5g
FOV: 4KF 2.8, FOV 150°(16/9), FPV FOV 165°(4/3)
Lens: Dual lens 2.8 / 12Mega
Image Sensor: 12M SONY sensor
TV System: NTSC / PAL, can be changed
Anti-Shake: Hardware anti-shake
Scene Mode: Auto / Personage / Scenery / Defog
Recording Timing Larm: OFF / 1mins / 3mins / 5mins / 10mins
Horizontal Resolution: 1200TVL
Image: 16:9 / 4: 3 (changeable)
Camera OSD: Seperate OSD
The camera tilt angle is switchable from 20 degree to 30 degree with ND8 fliter.


WHAT HAVE DONE TO SUPPORT 4S?
This Beta85X has upgraded in individual parts like FC, ESC, Motor, which can support 4S power with a steady performance and bring you into a glorious FPV world.

F4 FC & BLHeli_32 ESC

Support 4S Power. Written for ESC's that utilize 32-bit MCU. With the increase in processing power, faster input signals with lower latency and higher update rate would be possible in BLHeli_32, such as Dshot1200!
Using single N-channel MosFETs on ESC board, witch have a lower inner resistance. It is dual MosFETs on the original BLHeli_32 ESC board.
Current sensor included.
ESC is mounted on the frame by screws and connected with FC boards by cables.
Last Version: The performace of the ESC is limitted and could not stand 4S power on 85X for a long time. Besides, the ESC is connected to the FC board by header pins. When pluging the battery, the ESC will loose with the FC board and cause circut shot.


Power Capacitor
Soldering with 25V/220uf electrolytic capacitor, for reducing the defective rate caused by the instantaneous high voltage.
Last Version: Not power capacitor included, which have the risk that the permanently damage on ESC by impulse voltage when plug the battery.


1105 5000KV Motor

Lower 5000KV for new Beta85X 4S, which could support 4S power which won't cause the issue of overheat or burn (maybe the ESC). Also change motor cables from 30AWG to 28AWG.

Last Version: 1105 6000KV motors with 30AWG cables. In 4S power status, the motor will be overheat and damaged. Which may cause the burnt on the ESC.


Frame Stiffener Brace
The stiffener brace of carbon fiber can reinforce the Beta85X frame, avoid unstability caused by too strong power when Beta85x is flying.

Last Version: No stiffener brace included, which would result in seriously vibration on 4S power.

CADDX TARSIER 4K CAMERA
Tarsier camera is the first DVR boards that could support 4K@30fps recording. Here is the basic manual for you to use recording when get this Beta85X 4K drone.


【カメラの使用方法】
・WIFI/RECORD BTNは、通常は録画用です。長押しでWIFI作動します。
通常の場合は、短押しで録画開始(LED点滅)、もう一度短押しで録画ストップ(LED点灯)、
長押し(5〜8秒)でWIFI 作動します。そのあと、短押しでWIFIストップします。

・POWER/MODE BTNは、長押し(5〜8秒)でカメラのオン/オフ、短押しでビデオのピクセルチェンジします。

Apple Store(IOSフォン用)またはGoogle Store(Androidフォン用)にCADDX Tarsier APPがあります。
APPを通じて、あなたは測光、ホワイトバランス、EV補正、IOS制限、シャープネス、コントラスト、彩度のような設定を変更することができます。

Beta85X 4Kには、撮影時に光量を調整する減光フィルターND8 が付いております。


Beta85X 4Kは、プロップアウト
プロップアウトのメリットは、コーナーを急カーブするのに適しています。
Default Betaflight props direction, quadcopter dips and "washes out" in hard corners. With reversed props or "props out", no more dipping even in hardest cornering.


【セット内容】
1x Beta85X 4K Whoop Quadcopter(4S)( S-FHSS+D16 RX)
1x ND8 Fliter for Tarsier 4K camera
1x OSD Menu Board
1x 簡易日本語説明書(双葉プロポ設定データ)
1x 系統図

※機体に付いている受信機(AC900)について
こちらの受信機は、FUTABA S-FHSSとFRSKY D16を切り替えることによって両方のシステムをご使用頂けます。

【FUTABA S-FHSSとFRSKYの切り替え方法はこちら】※発送時は FUTABA S-FHSS

※こちらの商品は、お客様に郵送する前にヘリモンスターにてホバリングまでの動作確認テストを行います。
U199(200g未満)




【メンテナンスパーツリスト】

Props: 2" 4-Blades Props
EMAX 2035 Avan 2'' 4-Blade Propellers (1.5mm Shaft)
AVAN 2035 4-blade Whoop Propellers 2ペア
2x3.5" 2035-4S (50.8mm) T-Type Bullnose Quad Propeller
2x3.5" 2035-4S (50.8mm) T-Type Bullnose Propeller

FC&ESC: F405 V2 Flight Controller and 16A BLHeli_32 ESC(コンボ)ESCのみFCのみ

Motors: 1105 5000KV with connector

Camera: CADDX Tarsier 4K

Canopy: Canopy for Tarsier 4K camera

Receiver: Futaba S-FHSS / Frsky,D16

Frame: Beta85X 4S 4K Frame Kit (Upgrade)

VTX: A01 25-200mW 5.8G VTX

LED: BETAFPV LED Board (2PCS)[BF-00313443]

Battery:3セル〜4セル 450mah
TATTU 450mAh 14.8V 75C 4S1P Lipo Battery Pack Long [TATTU-020] 
BETAFPV 450mAh 4S 75C Lipo Battery (2PCS)[BF-00313491]
Tattu 450mAh 11.1V 75C 3S1P Lipo Battery Pack - Long [TATTU-002]



KW:Tinywhoop KW:Cinewhoop

この商品を買った人はこんな商品も買っています