F4 1-4S AIO Brushless Flight Controller 20A(BLHeli_S)[BF-00313610-2]

The 20A F4 AIO FC bright board thickness from 1.6mm to 1.2mm, which reduced the weight to 5.63g while improving the ability of the ESC to continuous current 20A. Now you can build a bigger quad with powerful FC to save weight and size!

This new board can handle 20A continuous current(25A burst), which is the first 20A All-in-one FC in the world
Compatible with 120X、130X、140X motors
No messy harnesses needed to join the All-in-one Flight Controller
With standard 26.5x26.5mm mounting holes for easy installation in most whoop frames
Integrated with a Betaflight MATEKF411 processor FC, Betaflight OSD, F4 MCU, and 20A ESC, support 1-4S battery
Comparison of F4 12A AIO FC and F4 20A AIO FC

CPU: STM32F411CEU6 (100MHZ)
Six-Axis: MPU6000 (SPI connection)
Size: 32.5*32.5mm (26.5mm mounting holes)
Firmware version: Betaflight MATEKF411 (MK41)
OSD: Built-in BetaFlight OSD (OSD chip: AT7456E)
Receiver: Support Frsky XM/XM+ Receiver/ Futaba Receiver/ Flysky Receiver/ TBS Crossfire Receiver/DSMX Receiver
Support programmable LED like WS2812 etc
Built-in current sensor
Weight: 5.63g

Support BLheli/BLHELI_S suite Pass-through ready
Support PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600
Input voltage: 1S-4S Lipo
Continuous current: 20A
Peak current: 25A
Firmware: BLHELI_S
Motor Connectors: 1.25mm header pins connector

1x F4 20A AIO 1-4S brushless flight controller
1x Cable Pigtail (XT30)
4x M1.2x4mm screws
4x M1.4x5mm screws
4x Anti-vibration rubber dampers